P3 International E9311 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 48

P3 International E9311 Скачать руководство пользователя страница 16

The frost warning is not deactivated until temperature rises above 41°F.
If required, you can enable an audible warning along with the frost warning
(see chapter 10.3).

•

The alarm value of 39.2˚F is fixed and not adjustable.

•

The frost warning is only enabled for the sensors displayed in

display panel A and B; in other words, if the temperature of
sensors not currently displayed falls below 39.2˚F, no alarm
occurs.

9.6. Activating the temperature alarm

You can set up high and/or low temperature thresholds.
If the temperature exceeds a threshold, a temperature alarm occurs.
• Status indicator ”

HI”

: upper temperature threshold is exceeded

• Status indicator ”

LO”

: temperature below lower temperature threshold

If you assign temperature threshold values, as described in chapter 10.2,
a temperature alarm automatically occurs.
To disable the temperature alarm, set the threshold to ”--.-“ (see Chapter
10.2).
If required, you can enable an audible warning with the temperature alarm
(see Chapter 10.3).

• The temperature alarm is only enabled for the sensors dis-

played in display panel A and B; in other words, if the tem-
perature of sensors not currently displayed exceeds one of
these thresholds, no alarm occurs.

9.7. Switching off audible alarm signal

- Press any key, to switch the audible warning off immediately.

The signal generator function remains enabled after switching off
the audible warning. However, audible warnings are blocked, for
as long as the temperature measurement causing the alarm is
outside of the normal range. For example, if a permanent frost
warning exists, there will be no audible alarm for the next tem-
perature measurement from the sensor in question. The audible
alarm is not reenabled until the measurement (frost warning or
min./max. temperature) causing the alarm returns to normal for
a minimum of one measurement.

F

F

F

«
...
14
15
16
17
18
...
»

Содержание E9311

















































Отзывы:

Нет отзывов