P3 International E9311, Руководство по эксплуатации

Страница: 26 / 48

Problem Remedy
Problems with the
Synchronization • When you insert batteries into the outdoor sensors
and the base station (make sure you follow this
order), the devices enter synchronization mode.
In sync mode, a datagram is transmitted every
4 seconds to speed up detection and registra-
tion of the outdoor sensors by the base station.
To trigger a resync, remove the batteries from
the base station and outdoor sensors. Then
wait for at least 60 seconds before reinsert-
ing the batteries into the outdoor sensors,
and finally the base station (make sure you
follow this order – insert batteries into all out-
door sensors first, then into the base station.
Note that this deletes all values/data stored
on the base station (e.g. min./max. values,
settings etc.).
• Before you set up the outdoor sensors, for ex-
ample in your garden, carry out a function test
as described in chapter 7.