P1PE P4000i, Руководство пользователя

Страница: 7 / 28

FEATURES
7
CONTROL PANEL FEATURES
Sockets
These can be used for operating appropriate
appliance, electrical lighting, tools, and motor
loads.
Start Indicator: Indicates that power is on, light
will remain lit the whole time the unit is on.
Output Ready LED: Indicates the inverter is
ready to be used.
Overload LED: Indicates that the inverter is
overloaded.
5
Low Oil LED: Indicates low oil level.
6
Fuel Control Switch: Allows fuel to flow to the
engine.
Push Button Automated Start: Push once to
automatically start the engine. Push again to
stop the engine.
Efficiency Mode Switch:
When turned to the ON
position, the engine will sense the load needed and
run at a slower RPM to save fuel.
DC Socket
The DC socket should ONLY be used for charging
12 Volt automotive type batteries.
USB Duplex: 5V DC USB outlets that come with 1
and 2.1 amp rating.
Parallel outlets
Parallel outlets enable a user to run two
generators simultaneously.
Ground Terminal:
The ground terminal is used to externally ground
the inverter.
BEFORE STARTING THE INVERTER
BEFORE STARTING THE INVERTER,
REVIEW SAFETY SECTION STARTING
ON PAGE 4.
Location Selection
– Before starting the inverter, avoid
exhaust and location hazards by verifying:
• You have selected a location to operate the inverter
that is outdoors and well ventilated.
• You have selected a location with a level and solid
surface on which to place the inverter.
• You have selected a location that is at least 6 feet
(1.8 m) away from any building, other equipment or
combustible material.
• If the inverter is located close to a building, make
sure it is not located near any windows, doors and/
or vents.
1
2
3
4
7
8
9
11
12
10
1
11
2
6
3
4
5
7
12
9 10 8