OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 80 / 110

OMRM 113 User Manual
85 | P a g e
1 Shows the number of profile to be cut
2 Shows profile stock code
3 Profile description (used to easily locate profiles)
4 Shows order no. of profile(s) to be cut
5
Shows the operation to be implemented on the profile (TES: Refers to Cutting with a
Saw)
6 Shows the customer that the profile is cut for
7 Shows the length of the profile to be cut
8 Shows the cutting angle of the fixed cutting unit
9 Shows the cutting angle of the movable cutting unit
10
Shows if profile cutting is complete or not ( Profiles with a tick (
√
) in the checkbox
are completed)
11 Shows the job order of the profile to be cut
12
1
Used for license settings of ERCOM program (Machine ERCOM program
becomes licensed)
2 Used to print barcodes for cut profiles
3 Removes cut profiles from cutting list
4 Used to move to previous page in cutting list (page is scrolled up)
5 Used to move to next page in cutting list (page is scrolled down)
6 Used to start cutting for profiles in cutting list