OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 63 / 110

OMRM 113 User Manual
68 | P a g e
1
a. Used to enter company name on barcode paper
b. Used to enter profile type on barcode paper
c. Used to enter profile code on barcode paper
2 Used for printing barcode after cutting
3 Shows the distance that machine is located (in mm)
4 The distance that machine is required to be sent is entered here (Profile cutting length)
5
Shows the cutting angle of fixed cutting unit ( Cutting units are only automatically tilted
to 45 and 90
°
). Then this area is clicked, fixed cutting unit will only be set to 45 and
90
°
6
Shows the cutting angle of movable cutting unit ( Cutting units are only automatically
tilted to 45 and 90
°
). Then this area is clicked, movable cutting unit will only be set to
45 and 90
°
7 Number of profiles cut in manual mod is reset when this area is clicked
8 Used to return to previous menu (Switches to Operation Mode menu)
9 Starts cutting according to entered dimensions and cutting angles
10 Stops the machine
Entering Target Distance in Manual Mode;