OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 92 / 110

OMRM 113 User Manual
97 | P a g e
1 Shows the current distance of the movable cutting unit
2
Profile length to be cut between 4000 -7500 mm can be entered. (Dimensions can be
entered using numeric keyboard opened after clicking target distance)
3 Used to set saw cutting speed of fixed cutting unit
4 Used to set cutting angle of fixed cutting unit
5 Used to set cutting angle of movable cutting unit
6 Used to set saw cutting speed of movable cutting unit
7 Used to return to previous menu
8 Go to End command sends the movable cutting unit to the farthest position
9 Used to stop cutting
10 Used to start long cutting

Enter the length of profile to be cut using "Target Distance".

Then make necessary arrangements on profile to be cut

Click "GO TO END" button to send movable cutting unit to the farthest position.

Load profile to the machine and fix the profile by activating profile tightening buttons.

Click "LONG CUTTING START" button.

Movable cutting unit will drive the profile

Activate saw .motors