OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 37 / 110

OMRM 113 User Manual
41 | P a g e
10.3 Control List
Button No. 1 Servo failure lamp. It is lit to inform the operator in case of servo failure.
Button No. 2
The button used to increase the movement speed of the movable unit. Press
button no. 2 to increase the movement speed of the unit while it is manually sent
for measurement
Button No. 3
Used to activate profile press pistons. Saw does not initiate cutting unless this
button is active.
Button No. 4 Used to move the movable unit left from your perspective.
Button No. 5
This is the button used to perform cutting. Cutting can be performed by pressing
buttons "5" and "10" simultaneously during cutting
Button No. 6
Green Button: Fixed unit is used to operate the saw motor
Red Button: Fixed unit is used to stop the operation of the saw motor
Button No. 7 Emergency stop button is used to stop the machine in case of danger
Button No. 8
Used to deactivate profile press pistons. Press this button to remove the cut
profile from the machine after cutting is complete
Button No. 9 Used to move the movable unit right from your perspective.
Button No. 10
This is the button used to perform cutting. Cutting can be performed by pressing
buttons "5" and "10" simultaneously during cutting
Button No. 11
Green Button: Movable unit is used to operate the saw motor
Red Button: Movable unit is used to stop the operation of the saw motor