4.Advanced User Guidebook
72
Measure
Only if the waveform channel is in the ON state, the measurement can be
performed. The automatic measurement cannot be performed in the
following situation: 1) On the saved waveform. 2) On Waveform Math
waveform. 3) On the Video trigger mode.
On the Scan format, period and frequency cannot be measured.
Measure the period, the frequency of the CH1, following the steps below:
1. Click
to call up the menu panel. Click the
Measure
softkey on panel
to show the automatic measurement function menu.
2. Select
Add
in the bottom menu.
3. In the left Type menu, select
Period
.
4. In the right menu, select
Source
as
CH1
.
5. In the right menu, select
Add
. The period type is added.
6. In the left Type menu, select
Frequency
.
7. In the right menu, select
Source
as
CH1
.
8. In the right menu, select
Add
. The frequency type is added.
The measured value will be displayed at the bottom left of the screen
automatically (see
Figure 4-18 Automatic measurement
The automatic measurement of voltage parameters
The oscilloscopes provide automatic voltage measurements including Mean,
PK-PK, RMS, Max, Min, Vtop, Vbase, Vamp, OverShoot, PreShoot, Cycle
RMS, and Cursor RMS.
below shows a pulse with some of the
voltage measurement points.
Содержание TAO3000 Dual-Channel Series
Страница 1: ...TAO3000 Dual Channel Series Tablet Oscilloscopes User Manual www owon com ...
Страница 93: ...4 Advanced User Guidebook 87 Figure 4 24 Hamming window Figure 4 25 Rectangle window ...
Страница 94: ...4 Advanced User Guidebook 88 Figure 4 26 Blackman window Figure 4 27 Hanning window ...
Страница 95: ...4 Advanced User Guidebook 89 Figure 4 28 Kaiser window Figure 4 29 Bartlett window ...
