4.Advanced User Guidebook
94
Note: When the autoscale is turned on and running, the Autoset button is
invalid.
Description for icon:
Cancel Autoset: Go back to display the upper menu and waveform information.
Note
: The Autoset
function requires that the frequency of signal should be no
lower than 20Hz, and the amplitude should be no less than 5mv. Otherwise,
the Autoset function may be invalid.
Print the Screen Image
To print an image of what appears on the oscilloscope screen, do as the
follows:
(1) Connect the printer to the
USB Device
port on the side panel of the
oscilloscope.
Note: The USB Device port supports PictBridge
compatible printers.
(2) Click
to call up the menu panel. Click the
Utility
softkey on panel,
select
Function
in the bottom menu, select
Output
in the left menu.
(3) In the bottom menu, select
Device
as
PICT
. (When
PC
is selected, you
can get an image by Oscilloscope software.)
(4) In the bottom menu, select
Print Set
. In the right menu, set the print
parameters. The
On
selection of
Ink Saver
will print out a copy with a
white background.
(5) Once you have connected a printer to your oscilloscope and set up print
parameters, click
Play
in the bottom menu to print current screen images.
Содержание TAO3000 Dual-Channel Series
Страница 1: ...TAO3000 Dual Channel Series Tablet Oscilloscopes User Manual www owon com ...
Страница 93: ...4 Advanced User Guidebook 87 Figure 4 24 Hamming window Figure 4 25 Rectangle window ...
Страница 94: ...4 Advanced User Guidebook 88 Figure 4 26 Blackman window Figure 4 27 Hanning window ...
Страница 95: ...4 Advanced User Guidebook 89 Figure 4 28 Kaiser window Figure 4 29 Bartlett window ...
