USER'S MANUAL
General instructions for use
(Rev. 0)
I-Max Touch (110-120V)
67
4.
Instruct the patient to close his eyes.
5.
Press the key "Centring devices ON" (14) .
Two laser beams will light up the sagittal medial plane line and the
horizontal line for the Frankfurt plane reference (Figure 10).
Using as reference the sagittal medial plane laser, position the
patient's head in such a way that the sagittal medial plane is lit by
the corresponding laser beam as in Figure 13.
The movement of the patient head due to the open mouth positioning
is automatically corrected by the software and should be not
necessary any column adjustment.
NOTE:
The laser centring device will stay lit up until the "Centring Devices ON"
(14) key or, at the end of the alignment, the key "Patient
Entrance" (6) is pressed to start the exposure.
6.
Close the temple clasps and bring the forehead support close; this
will help the patient to stay in a correct position. Check that, during
this phase, the patient has not changed position.
7. Advise the patient to remain perfectly still and not look at the
rotating arm during the movements.
*
Содержание I-Max Touch
Страница 1: ...Version 25 September 2009 Rev 0 I Max Touch 0459 110 120V version User s Manual...
Страница 5: ...USER S MANUAL Contents I Max Touch 110 120V Rev 0 iv THIS PAGE IS INTENTIONALLY LEFT BLANK...
Страница 129: ...USER S MANUAL Maintenance I Max Touch 110 120V Rev 0 124 THIS PAGE IS INTENTIONALLY LEFT BLANK...