Owandy I-Max Touch, Руководство пользователя

Страница: 59 / 130

USER'S MANUAL
General instructions for use
I-Max Touch (110-120V) (Rev. 0) 54
NOTE:
The I-Max Touch assumes that the digital sensor is ready: if this is not
the case, the following error message will be displayed:
D I G I T A L S E N S O R
I S N O T R E A D Y
Refer to the Manual of the Digital Acquisition System to correct the
situation.
To reset the message on the I-Max Touch, press key .
NOTE:
The rotation of the arm and the emission of the X-rays will start with a
delay of 2 seconds from when the X-ray button is pressed.
Since the
X-ray button is a "dead man’s switch", it must be kept pressed until
the end of the exposure.
2. Once the exposure is completed, the system will rotate back. When it
has completed this movement, the display shows the message:
P A T I E N T E X I T
P R E S S > 0 <
and it will be necessary to free the patient from the positioning
device.
NOTE:
If the examination is made in "Test" mode with the patient already in
position, he must not be removed from the temple clasp group, to avoid
having to reposition him. Press the "Patient Entrance" (6) key to
return the unit to its initial position. This movement can be stopped by
pressing the same key.
Now the system is ready to perform a new examination.
3. Press the key "Patient Entrance" (6) , the unit will move back
to the starting position showing the message:
P L E A S E W A I T . . .
The Digital Acquisition System will, in the meantime, process the
image and display it.
*
*
*