OVS 16CH-P8 Скачать руководство пользователя страница 97

Страница: 97 / 240

User Manual of 87XX-P Series NVR

5.10

Files Protection

Purpose:

You can lock the recorded files or set the HDD property to Read-only to protect the record files from being

overwritten.

Protect file by locking the record files:

Steps:

Enter Playback setting interface.

Menu> Export>Normal

Figure 5. 38

Playback

Select the channels you want to investigate by checking the checkbox to

Configure the record type, file type start/end time.

Click

Search

to show the results.

Figure 5. 39

Playback- Search Result

Protect the record files.

Find the record files you want to protect, and then click the

icon which will turn to

indicating that the file is locked.

Note:

The record files of which the recording is still not completed can’t be locked.

Click

to change it to

to unlock the file and the file is not protected.

User Manual

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 97 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: