OVS 16CH-P8 Скачать руководство пользователя страница 62

Страница: 62 / 240

User Manual of 87XX-P Series NVR

3.2

Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen

: showing only one screen on the monitor.

•

Multi-screen:

showing multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each screen

on the configuration menu before enabling the auto-switch.

Menu>Configuration>Live View>General.

•

Start Recording:

normal record and motion detection record are supported.

•

Output Mode:

select the output mode to Standard, Bright, Gentle or Vivid.

•

All-day Playback:

playback the recorded videos for current day.

3.2.1

Using the Mouse in Live View

Table 3. 2

Mouse Operation in Live View

Name

Description

Enter the menu of the system by clicking the icon.

Switch to the single full screen.

Adjust the screen layout by clicking the specific icon.

Switch to the previous/next screen.

Enable/disable the auto-switch of the screens.

Start continuous recording or motion detection recording of all channels.

Enter the playback interface and start playing back the video of the selected

channel immediately.

Four modes of output supported, including Standard, Bright, Gentle and Vivid.

Fix the menu

Note:

The

dwell time

of the live view configuration must be set before using

Start Auto-switch.

Note:

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when

right-clicking mouse on this camera.

Figure 3. 1

Right-click Menu

Note:



Two ways are provided to show the Right-click Menu Bar: right-clicking or moving the mouse to the bottom

of the screen.



You can click

on the right side of the menu bar to fix the menu.

User Manual

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 62 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: