OVS 16CH-P8 Скачать руководство пользователя страница 12

Страница: 12 / 240

Quick Operation Guide of 8700-P Series NVR

Record Settings

12.

Click Copy to copy the settings to other channels.

Copy Record Settings

13.

Click OK to complete the startup Setup Wizard.

Live View

Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can find problems as soon as possible.

Alarm (video loss, tampering, motion detection or sensor alarm).

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 12 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: