OVS 16CH-P8 Скачать руководство пользователя страница 22

Страница: 22 / 240

Quick Operation Guide of 8700-P Series NVR

Playback

Interface Introduction

①

Camera List: Displays the list of cameras and the playing status of each camera.

②

Playback Window: Displays the video of camera.

③

Play Control Bar: Play control operations are supported.

④

Time Line: Displays the time bar and the records marked with different colors.

⑤

Playback Status: Displays the playback status, including camera No. and playback speed.

⑥

Calendar: You can select the date to play.

Start Playback

Steps:

Click

Playback

on the menu bar to enter playback interface.

Click the camera from the device list for playback.

Select the date from the calendar and click

Search

Note:

The day with record will be marked like

Click the

button to play the video file searched on the current date.

Use the buttons on the toolbar to operate in playback mode.

Button

Description

Button

Description

Play/Pause

Stop

Slow down

Speed up

Play by single frame

Capture

Stop All Playback

Download

Video Clip

Open/Close audio

Full-screen

You can drag the progress bar with the mouse to locate the exact playback point. You can also input the time

in the textbox

and click

button to locate the playback point.

The color of the video on the progress bar stands for the different video types.

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 22 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: