OVS 16CH-P8 Скачать руководство пользователя страница 120

Страница: 120 / 240

User Manual of 87XX-P Series NVR

7.1

Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1

Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

Figure 7. 1

Quick Export Interface

Export.

Go to Export interface, choose backup device and click

to start exporting.

Note:

Here we use USB Flash Drive and please refer to

Chapter 7.1.2 Backing up by Normal Video Search

for more backup devices supported by the device.

User Manual

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 120 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: