OVS 16CH-P8 Скачать руководство пользователя страница 132

Страница: 132 / 240

User Manual of 87XX-P Series NVR

109

7.2

Managing Backup Devices

Management of USB flash drives and USB HDDs.

Steps:

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7. 27 Normal Video Search for Backup

Select record files you want to back up.

Click

to enter Export interface.

Note:

At least one record file shall be selected.

Figure 7. 28 Result of Normal Video Search for Backup

Backup device management.

Click

if you want to create a new folder in the backup device.

Select a record file or folder in the backup device and click

if you want to delete it.

Select a record file in the backup device and click

to play it.

Click

to format the backup device. Two kinds of file system can be configurable, including

FAT32 and NTFS.

Note:

If the inserted USB device is not recognized:

User Manual

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 132 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: