OVS 16CH-P8 Скачать руководство пользователя страница 17

Страница: 17 / 240

Quick Operation Guide of 8700-P Series NVR

Playback

Play back the record files of a specific channel in the live view menu. Channel switch is supported.

Instant playback by channel

Steps:

Choose a channel in live view mode using the mouse and click the

button in the quick setting toolbar.

Note:

In the instant playback mode, only record files recorded during the last five minutes on this channel will be

played back.

Instant Playback Interface

Playback by channel

Steps:

Enter the Playback menu.

Mouse: right click a channel in live view mode and select Playback from the menu.

Right-click Menu under Live View

Front Panel: press PLAY button to play back record files of the channel under single-screen live view.

Under multi-screen live view, record files of the top left channel (not masked) will be played back.

Note:

pressing numerical buttons will switch playback to related channels during playback process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 17 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: