OVS 16CH-P8 Скачать руководство пользователя страница 117

Страница: 117 / 240

User Manual of 87XX-P Series NVR

6.2.3

Digital Zoom

Steps:

Click the

button on the playback control bar to enter Digital Zoom interface.

Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.

Figure 6. 30

Draw Area for Digital Zoom

Right-click the image to exit the digital zoom interface.

6.2.4

Reverse Playback of Multi-channel

Purpose:

You can play back record files of multi-channel reversely. Up to 16-ch (with 1280*720 resolution) simultaneous

reverse playback is supported; up to 4-ch (with 1920*1080P resolution) simultaneous reverse playback is

supported and up to 1-ch (with 2560*1920 resolution) reverse playback is supported.

Steps:

Enter Playback interface.

Menu>Playback

Check more than one checkboxes to select multiple channels and click to select a date on the calendar.

User Manual

Содержание 16CH-P8

















































































































































































































































Результаты поиска

Содержание 16CH-P8

Отзывы:

OVS 16CH-P8, Краткое руководство по эксплуатации, Страница: 117 / 240

Результаты поиска

Содержание 16CH-P8

Отзывы: