Ovislink AirLive WL-8064ARM Скачать руководство пользователя страница 9

Страница: 9 / 146

IEEE 802.11g Wireless Standards

IEEE 802.11b/g standards compliant.

Support data rates up to 54Mbps ( Auto-Rate Capable ).

Support 11g+ with data transmission rate up to 108Mbps (Optional)

Support OFDM (64QAM, 16QAM, QPSK, BPSK) and DSSS (DBPSK, DQPSK, CCK)

modulation.

Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi)

Standard.

Support WEP/WPA/802.1X Encryption for data security.

Support 2.412GHZ ~ 2.484GHz frequency ranges.

ATM Protocols

Support ATM ALL0, ALL2 & ALL5.

Support up to 8PVCs.

Support ATM UBR, CBR, VBR-rt and VBR-nt Traffic Shaping QoS.

Support OAM F4/F5 Loop Back.

Support PPPoA (RFC2364).

Support PPPoE (RFC2516).

Router/Bridged Ethernet over ATM (RFC2864 / RFC1483).

Classical IP over ATM (RFC2225 / RFC1577).

Router Mode

IP Routing – RIPv1 and RIPv2.

Static Routing.

DHCP Server, Relay and Client.

Support DNS Relay/Server.

Support DMZ functionality.

Support NAT and NAPT (PAT) functionality with extensive ALG supported.

Support IPSec, L2TP, PPTP Pass-Through.

Support VPN Pass-Through.

Support SNMP functionality.

Support ICMP and IGMP.

Support PAP and CHAP PPP Authentication.

Bridge Mode

Support Transparent Bridging ( IEEE 802.1D ).

Support RFC 2684/1483 Bridged.

Содержание AirLive WL-8064ARM



















































































































































Результаты поиска

Содержание AirLive WL-8064ARM

Отзывы:

Бренды по названию

Популярные бренды

Ovislink AirLive WL-8064ARM, Руководство пользователя

Результаты поиска

Содержание AirLive WL-8064ARM

Отзывы:

Бренды по названию

Популярные бренды