127
5.
LAN (Link/Act) LED does not light up.
Ans.
Check the following:
1. Make sure that the LAN cables are securely connected to the 10/100Base-T port.
2. Make sure that you are using the correct cable type for your Ethernet equipment.
3. Make sure the computer's Ethernet port is configured for auto-negotiation.
6.
Failed to configure the WL-8064ARM Wireless ADSL2/2+ Router through web browser ( By
a client PC in LAN )
Ans.
Check the following:
1. Check the hardware connection of the WL-8064ARM Wireless ADSL2/2+ Router’s LAN port.
The LED will lit when a proper connection is made.
2. Check your Windows TCP/IP setting (Refer to Chapter 3 for setting details).
3. Open the Windows System Command Prompt:
For Windows 9x/ME: Manually enter
winipcfg
, then press
Enter
.
For Windows 2000/XP: Manually enter
ipconfig/all
, then press
Enter
.
4. You should have the following information listed on your Window System:
IP Address: 192.168.1.x
Submask: 255.255.255.0
Default Gateway IP: 192.168.1.1
7.
I
forgot or lost my Administrator Password.
Ans.
Reset
the WL-8064ARM Wireless ADSL2/2+ Router
to factory default by pressing the
“Reset”
button for 10 seconds.
If you are still getting prompted for a password when saving settings:
1.
A
ccess the Router’s web interface by going to
http://192.1681.1.
2. Enter the default
“username”
and
“password”
then click
“Enter”
to log in.
3. Click
on
“TOOLS”
then click “
User Management”
.
4. Enter a new
“Password”
and
new
“Username”
in the
“Username”
and “
Password”
field,
and enter the same password in the second field to confirm the password.
5. Click
“Apply”
after your setting.
