128
8.
I need to upgrade the Firmware.
Ans.
In order to upgrade the Firmware with the latest features, go to the OvisLink’s website and
download
the latest Firmware at
http://www.ovislink.com.tw/
. Before proceed the upgrading process, check
the following details:
1. Download the latest Firmware and save at your pointed location.
2. Read the firmware release note carefully before proceed the upgrading process.
3. Refer
to
TOOLS
→
Update Gateway
section for the upgrading process.
9.
Testing LAN path to your WL-8064ARM Wireless ADSL2/2+ Router.
Ans.
To verify whether the LAN path from your PC to your WL-8064ARM Wireless ADSL2/2+ Router is
properly connected, you can
“Ping”
the WL-8064ARM Wireless ADSL2/2+ Router with the
following procedures:
1. From the Windows toolbar, click
“Start”
and select
“Run”.
2. In the open field, type
“Ping 192.168.1.1”
and click
“OK”
3. If the path is working, you should see the message in the following format:
Reply from 192.168.1.1 bytes = 32 time < 10ms TTL = 60
4. If the path is not working, you should see the following message:
Request timed out
If the path is not functioning correctly:
1. Make sure the LAN port LED indicator is on.
2. Check whether you are using the correct LAN cable.
3. Check your Ethernet Adaptor installation and configurations.
4. Verify that the IP address for your WL-8064ARM Wireless ADSL2/2+ Router and your
workstation are correct and that the addresses are on the same subnet.
