56
4.3.2.1.4 LAN Configuration – Use The Following Static IP Address
Use the following Static IP address:
The following configuration screen will pop-up.
Click the radio button to select
Enable DHCP Server
or
Enable DHCP Relay
or
Server and Relay Off
.
Manually enter the necessary items based on each selection.
IP Address:
This is the static IP Address given by the ISP.
Netmask:
This is the subnet mask given by the ISP.
Default Gateway:
This is the Gateway given by the ISP.
Host Name:
Can be any alpha-numeric expression that does not contain spaces.
Domain:
Used in conjunction with the host name to uniquely identify the gateway.
Enable DHCP Server:
Click the radio button to enable the DHCP Server
.
Start IP:
The Start IP Address indicates the beginning of the range at which the DHCP server
starts issuing IP addresses.
This value must be greater than the Routers IP address value. If the Routers IP address is
192.168.1.1 (The default) than the starting IP address must be 192.168.1. 2 or higher.
End IP:
The End IP Address indicates the end of the IP address range.
The ending address must not exceed a Subnet Limit of 253; hence the maximum value that
can be entered in this example is 192.168.1.254.
