Ovislink AirLive WL-8064ARM Скачать руководство пользователя страница 58

Страница: 58 / 146

4.3.2.1 LAN Setup - LAN Configuration

Click LAN Configuration and the following screen will be shown.

Click

Add

Remove

Interfaces from list under the different LAN Group. The LAN Group features

only supported under

Bridge

Mode

setting. Interfaces under the same LAN Group (WLAN,

Ethernet and USB) will have the ability to communicate with each other. Different LAN Group are

prohibited to communicate with one another.

Click

Configure

for detail LAN Group setting. Refer to next section for detail LAN Configuration or

Setting.

Apply:

Click

Apply

to complete the setting.

Cancel:

Click

Cancel

to ignore all the changes.

To complete and save the setting, click

Save All

after clicking the

Apply

button.

Содержание AirLive WL-8064ARM



















































































































































Результаты поиска

Содержание AirLive WL-8064ARM

Отзывы:

Бренды по названию

Популярные бренды

Ovislink AirLive WL-8064ARM, Руководство пользователя

Результаты поиска

Содержание AirLive WL-8064ARM

Отзывы:

Бренды по названию

Популярные бренды