Oval Ultra mass MKII CN003, Инструкция по эксплуатации

Страница: 46 / 72

L-718-8-E
NOTES
1. Key Protect ON/OFF is selectable with LinkTop or WP (write protect jumper).
2. With Key Protect ON, a keystroke acknowledge indicator ＝ appears.
With Key Protect OFF, a keystroke acknowledge indicator □ appears.
3. Following an acceptance permit declaration ("SEt PASS" is set), passing of 5 minutes or after zeroing and total reset, the
acceptance permit declaration is cancelled. An attempt to make zeroing or total reset brings up a message "Abort" to appear.
4."Abort" appears when key-in operation for an auxiliary operating function (except for tube frequency readout) falls short of the
operating requirements, and the key command is aborted.
6.3.2 Key Scroll
About the key scroll at "security mode" setup.
MassFlow
F1 ： XXX.XX
ON : Between 5 and 7 sec; invalid above 7 sec.
OFF: 1 sec. min.
ZEro
No command for 5 sec.
min. or less than 5 sec.
ON : 5 to 7 sec
OFF: 1 sec.
No command for 5 sec.
min. or less than 5 sec.
－ rEAdy －
ON : 5 to 7 sec
OFF: 1 sec.
ZEro Adj
Zeroing ends.
－ Abort －
3 sec. elapsed
Key Protect OFF and SET PASS ON
Key Protect OFF and SET PASS ON
Dens
d ： X.XXXX
ON
Temp
t ： XX.XX
ON
D － Total
XXXXXXXX
ON
Less than
5 sec.
ON : Between 5 and 7 sec; invalid above 7 sec.
OFF: 1 sec. min.
②
tot.rESEt
ON : 5 to 7 sec
OFF: 1 sec.
No command for 5 sec.
min. or less than 5 sec.
－ rEAdy －
ON : 5 to 7 sec
OFF: 1 sec.
－ rESEt －
3 sec. elapsed
Key Protect OFF and SET PASS ON
－ Abort －
3 sec. elapsed
ON : 5 to 7 sec
OFF: 1 sec.
No command for 5 sec.
min. or less than 5 sec.
No command for 5 sec.
min. or less than 5 sec.
ON : 5 to 7 sec
OFF: 1 sec.
－ PASS －
3 sec. elapsed
Key Protect OFF
－ Abort －
3 sec. elapsed
－ rEAdy －
PASS
Analog 1
A1 ： XX
ON
Analog 2
A2 ： XX
ON
SEt PASS
No command for 5 sec.
min. or less than 5 sec.
Key Protect ON
Key Protect ON and SET PASS OFF
①
No command for 5 sec.
min. or less than 5 sec.
ON : 5 to 7 sec
OFF: 1 sec.
No command for 5 sec.
min. or less than 5 sec.
－ rEAdy －
ON : 5 to 7 sec
OFF: 1 sec.
Freq
XXX.XXX
ON
Freq
Less than
5 sec.
ON
②
ON
Less than
5 sec.
ON : Between 5 and 7 sec; invalid above 7 sec.
OFF: 1 sec. min.
ON : Between 5 and 7 sec; invalid above 7 sec.
OFF: 1 sec. min.
VolFlow
F2 ： XXX.XX
No command for 5 sec.
min. or less than 5 sec.