manualshive.com logo in svg

Oval Ultra mass MKII CN003, Инструкция по эксплуатации, Страница: 56 / 72

Поделиться
Скачать
Oval Ultra mass MKII CN003 Скачать руководство пользователя страница 56

L-718-8-E

8.1.2 Error Output Selection

 

Menu Item 

Error Name 

Description

 

Saturated alarm  

Saturated output alarm

 

When analog output is out of 2.4mA or 21.6mA range

   

 

or pulse output is above 11kHz.

  Sensor failure 

Sensor alarm

 

When input from the sensor (drive, temperature) is

   

 

out of range, or result of measurement (flowrate, 

   

 

density) is out of permissible range.

  Transmitter failure  

Transmitter alarm 

An error in data processing inside the transmitter.

  Parameter alarm  

Parameter alarm 

Parameter established is out of range.

  Adjustment failure  

Zeroing error 

Zeroing error (above max. allowable range ± 10%)

  Slug flow alarm  

Slug flow alarm

 

Out of predetermined density range, such as bubble

   

 

entrapment (default: 0.3 to 2gmL)

  Fixed output 

Fixed output

 

Analog output, pulse output, status output, etc. are

   

 

fixed.

  Calibration in  

Calibration in progress

 

Calibration is in progress (including zeroing).

  progress  

 

  Burst mode 

Burst mode enabled 

Currently in the burst mode.

 NOTES 1. Error output is valid only when“Error Status”is selected at Status Output menu.

2. Error output is selectable at Error Select menu (menu items turned“ON”become valid).

3. When one or more of the selected menu items happen to be in error, the contact-closure output 

becomes “OFF” (normally“ON”).

Содержание Ultra mass MKII CN003









































































Отзывы:

Нет отзывов