Output Technology LaserMatrix LM2405, Руководство оператора

Страница: 34 / 249

2-2 Operations
CB0-AN1
3. If changing to a different form width,
reposition tractors to accommodate a
change in paper width. To do so, push
back on the green locking levers on both
tractors and then reposition the tractors to
approximately match the new paper. Do
not lock the levers as yet.
The tractors are mounted on a rack and
pinion device so that they move as a unit.
When one is moved, the other
automatically adjusts to the same
complementary position.
CB0-AO2
4. Open hinged paper retainers on tractors.
Check that each of the two paper pads that
straddle the two tractor shafts are
approximately halfway between the center
and edge of the paper path.
5. Check that the paper has a non-jagged,
uncurled leading edge, normally along a
horizontal perforation.
2
See the Paper and Label
Recommendations on the following page.
2 All horizontal perforations may not be alike. If you are using a form length which is not an exact multiple of
1
/
2
in., such as
a metric paper size (A4, for example), select the leading horizontal edge where the perf is vertically centered between
preceding and succeeding paper sprocket holes. (See illustration on Page 2-4.)