Output Technology LaserMatrix LM2405, Руководство оператора

Страница: 111 / 249

Operator's Guide 6-9
CLEANING PROCEDURES
WARNING ! Turn the printer off before cleaning any areas inside the
printer.
Caution ! Except as specifically instructed in this publication, avoid
using liquids, including soap and water, inside the printer.
Note: A printer cleaning kit is available from the manufacturer.
Perform the following cleaning procedures, as required or at the periodic
interval specified in the table, Maintenance Intervals, on Page 6-8.
Cleaning Exterior Surfaces
Most exterior dirt can be cleaned up with a soft cloth dampened with soap
and water. (Remember: The cloth should be moist—not dripping wet.)
For toner spills, also see Cleaning Toner Spills, Page 6-10.
Avoid petroleum-based cleaners and solvents such as lighter fluid, or paint
thinner. If necessary, use a commercial cleaner, such as 409
8 , to clean
surfaces. When using a spray, apply the cleaner to a soft cloth and then
apply to the printer. Isopropyl alcohol (70%-90%) can be used instead of a
commercial cleaner, except as noted on the next page.
8 409 is a brand name of the Clorox Company.