Output Technology LaserMatrix LM2405, Руководство оператора

Страница: 228 / 249

Operator's Guide 8-21
Notes:
•
Unlike a cut-sheet printer, this printer allows for very flexible,
continuous-form, page-length control. Since HP LaserJet printers are
limited to a maximum of four cut-sheet sizes (Executive, Letter, Legal, or
A4), this command may cause very different results on this printer versus
an HP LaserJet printer. For example, if # = 12, this command causes
an HP LaserJet to print an Executive (7
1
/
4
in. x 10
1
/
2
in.) page.
•
If the page length set using this command equals one of the standard
page sizes (Executive, Letter, Legal, A4, A5, or A6), the printer includes
a no-print area of
1
/
6
in. at the top and bottom of the page. (Also, see
E
c
&
llll
# A, Page 8-9.)
•
The space between lines is defined by the current vertical motion index
(VMI). (If the current VMI is zero this command is ignored.)
•
The page length in inches must be greater than ½ in. If not, the Page
Length command is ignored.
•
This command causes the current page to be printed; resets text length
and top, left, and right margins to their default values; and disables
macro overlays.
E
c %
––––
1 2 3 4 5 X Exit Language/Enter PJL
ASCII:
E
c
%
–
1 2 3 4 5 X
Decimal:
27 37 45 49 50 51 52 53 88
If
Emu= LaserJet*
or
...PS
, this command causes the printer to exit the PCL 5 or
PostScript emulation and enter the printer job language (PJL). (
E
c % – 1 2 3 4 5 X
has no affect if Emu= Auto* .)
PJL commands are covered in the next subsection.