OutBack Power HiQ TS208-5k75, Инструкция по установке и безопасности

Страница: 18 / 48

PRO208V-5k75 Installation and Safety Manual
900-0203-01-00 Rev B
18
5. Turn on the AC source.
This starts a 5-minute timer.
When it expires, each inverter will
perform a self-test and then begin
generating. During the wait period,
the inverter button will be solid
green. (See Table 2 on page 20.)
This does not apply if the system is
in the
Off + Locked
state.
The <
Off + Unlock
> button
B
will
unlock any inverters in the system.
An individual inverter may be
unlocked by pressing the inverter
button three times.
To skip the 5-minute wait, press the
<
Power On
> button
A
. The units will
self-test and then begin generating.
(See Table 2 on page 20 for the
LED indications of self-test.)
Once self-test has been successfully completed, power generation begins.
For individual inverters, check the
Gateway
Strings
screen using the
<
Strings
> button
C
to verify all items
indicate
Healthy
.
Connection is complete.
C
A
B
Figure 17: Verifying that all modules are operational using the Gateway
Figure 16: Power On and Unlock buttons