Oursson AM6244, Инструкция по эксплуатации, Страница: 13 / 65

24 25
Cleaning the brewing unit
• After a long-term use, there will be some coffee bean
powder left on the brewing unit. Remove the left powder
by clean the brewing unit.
• To clean the brewing unit use only pills specially
purposed for this . Before cleaning, make sure
that you are using detergent that suits your coffee
machine.
•
Do not interrupt the cleaning process or it may
cause damage to your coffee machine. Wait for
the cleaning process to complete.
• Enter service menu.
• Using find cleaning brewing unit menu, display will
say « CLEAN BREWING UNIT » and press .
• Display will say « CLEANING »
• Open powder coffee container add pill, close
the container and press .
• Display will say « CLEAN BREWING UNIT », press .
• Cleaning process is active; display will say
« CLEANING... »
• Cleaning process is complete, display will say « READY ».
Dry the water from the tray and clean the container for
grounds.
Cleaning the milk frother
• After long use of the coffee machine it is necessary clean
the milk frother.
• Enter service menu.
• Using find cleaning brewing unit menu, display will
say « RINSE MILK UNIT » and press .
• Remove the milk pipe from the container with milk. Insert
the end of the pipe into the tray opening, press .
• Cleaning process is active, display will say « CLEANING »
Descaling the coffee machine, Рiс. D-1
• The daily usage will cause calcareous deposited in coffee
machine. The depositing rate vary with the local water
hardness.
• To descale the coffee machine use special
detergent .
• Enter service menu.
• Using find descale menu, display will say
« DESCALE » and press .
• Fill the water tank with water to MAX and dissolve in it a
special descaling detergent, display will say « SOLVENT
IN TANK ».
• Place under the spout a container no less than 1L
capacity, press .
• Cleaning process is active; display will say
« DECALCIFYING... ». Follow the instructions on display.
• Add water into the tank after first cleaning cycle, display
will say « FILL WATER TANK ». Press .
• Cleaning process is complete, display will say « READY ».
Dry the water from the tray and clean the container for
grounds.
1
1
3
4
5
2
4
5
3
2
6
7
8
Protect your eyes and skin from contact with
the detergent. In case of contact with skin
or eyes - immediately rinse them with clean
water.
CLEANING
CLEANING
CLEANING
READY
READY
READY
READY
1
8
6
4
7
5
3
2
9
10
MAINTENANCE
MAINTENANCE
MAINTENANCE
30 MINS
PRESS RINSE
SOLVENT IN TANK
FILL WATER TANK
DESCALE
EMPTY TRAY
INSTALL TRAY
DECALCIFYING
DECALCIFYING
CLEAN BREW UNIT
RINSE MILK UNIT
RINSE MILK UNIT
REMOVE MILK PIPE
OPEN COVER ADD
CLEANING TABLET
CLOSE COVER
PRESS RINSE
CLEAN BREW UNIT
Cleaning the coffee grounds container and the drip
tray, Рiс. D-2
• Each time after cleaning, wash the drip tray and
grounds container with clean water, wipe dry, wipe
dry additionally 2 metal plates on the tray
• Coffee grounds container capacity is 15 cups. It will
automatically indicate « EMPTY GROUNDS » when it is
full.
• Remove drip tray, clean the grounds container, display
will say « INSTALL TRAY ».
• Cleaning process is complete, display will say « READY ».
Dry the water from the tray and clean the container for
grounds.
• Display « READY », indicator « CLEANING » isn’t flashing,
press .
• Display will show « CLEANING ».
• Each time after cleaning, wash the drip tray and grounds
container with clean water, wipe dry, wipe dry additionally
2 metal plates on the tray.
• If the drip tray is full, the machine will automatically
prompt « EMPTY TRAY ».
• Remove drip tray, clean it, display will say « INSTALL
TRAY ».
• Install the tray, display will say « READY ».
Cleaning other parts of the coffee machine
1
1
3
3
2
2
Before cleaning the interior of the coffee
machine, power it off, and pull out plug. Never
immerse the coffee machine in water. There
will be a risk of electric shock.
• Regularly check the coffee machine whether there is
excessive coffee bean powder precipitate inside the
machine. You can use a brush to remove the coffee
precipitate.
• Use a dry and soft rag to wipe the touch panel of the
machine. As the touch panel is made of glass, please do
not hit it to avoid the risk of electric shock once the glass
broken
Cleaning the water tank, Pic D-3. Wash water tank in
warm water.
Cleaning the milk frother, Pic D-4. Remove the milk
frother. Disassemble the frother according to picture. Wash
in warm water. Assemble it and install to its place.
Cleaning the bean container,
Pic D-5. Clean the
container with a dry sponge or paper.
Cleaning the milk pipe, Pic D-6. Clean the milk pipe every
day. Carefully remove the pipe from the frother. Wash in
warm water.
• Thoroughly dry all parts.
Cleaning the spout,
Pic D-7. Clean the spout every day
with a damp soft cloth.
Make sure there is no plaque
around the spout.
POSSIBLE PROBLEMS AND SOLUTIONS
Causes Solutions Display
If the water drip tray is full, any function of
making beverage will be out of service.
Clean the drip tray
If the coffee grounds container is full, any
function of making beverage will be out of
service.
Clean the grounds container
If water in the water tank is used up, any
function of making beverage will be out of
service.
Fill the water tank
If coffee beans in the bean container are used
up, function of making coffee will be out of
service.
Fill the coffee beans container
Making beverages is not available
Add one spoon of powder into
the container
The drip tray is not installed correctly; any
function is out of service.
Install the drip tray correctly.
The water in the pipe inside the machine is not
enough; any function is out of service.
Press to top up the system
with water
READY
READY
INSTALL TRAY
EMPTY GROUNDS
INSTALL TRAY
INSTALL TRAY
EMPTY TRAY
EMPTY TRAY
FILL WATER TANK
FILL BEANS
LACK OF POWDER
UNIT EMPTY
EMPTY GROUNDS