Otto Bock B400b400, Инструкция по эксплуатации

Страница: 50 / 76

50 | Ottobock B400
► Ensure that the lap belt is not too tight against the
body.
►
Remove objects or clothing which get caught.
The lap belt provides additional support and keeps the user
from sliding out of the seat.
Putting the lap belt on
>
The user sits upright or lies in the power wheelchair.
1) Push the 2 halves together until the buckle engages with
an audible click.
2) Pull to check that it is secure.
→ The belt is put on.
Fig. 32 Putting the lap belt on
Opening the lap belt
►
Press the red release button.
→ The buckle is open and the belt can be removed.
Adjusting the belt length
The belt length can be adjusted on both sides. Excess belt
length is taken up by the plastic slider.
>
The user sits upright or lies in the power wheelchair.
1) Close the belt.
2) Position the 2 buckle halves in the middle of the body.
3) Position the respective half of the buckle at a right angle
(see Fig. 33, item 1).
4) Slide the 2 halves of the closure to the desired position.
5) Release the respective half of the buckle.
→ The belt length is adjusted.
Usage