Otto Bock B400b400, Инструкция по эксплуатации

Страница: 36 / 76

36 | Ottobock B400
7) Turn the power wheelchair control unit on.
→
The power wheelchair is ready to use.
Fig. 15 Charging/programming receptacle on the control pan­
el
6.8 Power seat functions
The power wheelchair can be equipped with a range of
optional power seat functions.
6.8.1 Safety Instructions
WARNING
Driving with power seat options
Falling, tipping over due to user error
► Drive in street traffic only with the seat tilt and seat
height adjustments lowered and with a vertical back­
rest.
►
Drive with the seat raised or with the seat tilt/back
angle adjustment activated only for short distances at
home. Always use the speed level 1 for this. Note that
the field of vision is limited when driving.
► Slightly tilt the seat to the rear when driving forwards
down inclines or over obstacles (e.g. curbs) and
reduce the speed.
► Use the seat height adjustment and the seat tilt only on
firm, level ground.
►
Note that the climbing ability of power wheelchairs with
electric seat height adjustment and seat tilt is reduced.
Driving on inclines and slopes is permitted under ISO
7176-1 and 7176-2 with lowered seat height adjust­
ment and lowered seat tilt up to
max 6° (10%)
.
WARNING
Overloading
Falling, tipping over due to non-compliance with technical
data
►
Note that the maximum permitted load of the power
wheelchair may be reduced when using the options
"Electric seat height adjustment" and "Electric seat tilt"
(see section "Technical Data").
Usage