Otto Bock B400b400, Инструкция по эксплуатации

Страница: 37 / 76

Ottobock | 37 B400
WARNING
Exposed pinch points in the seat adjustment and lift­
ing areas
Risk of pinching, crushing of limbs
►
Note that when power seat options are used, inherent
pinch and shear points are located between the seat
frame and the power wheelchair frame.
► Ensure that no body parts, such as hands or feet, are
in the danger area while power seat options are used.
► Ensure that no interfering objects, such as clothing or
other obstacles, are in the danger area while power
seat options are used.
WARNING
Overloading of the actuators
Risk of falling, tipping, pinching, crushing of limbs
► Avoid overloading the actuators. Overloading may
cause the spindle nut to break, causing the seat to sag
or the backrest to flip back suddenly.
NOTICE
Improper use of power seat options
Risk of damage to the product
► When using power seat options, note that the seat
function actuators are not designed for continuous
use, only for short-term use under limited loads (10%
load, 90% idle time).
►
Observe the following guidelines: At maximum load
capacity, 10 seconds of activation time must be fol­
lowed by approx. 90 seconds of idle time. The power
seat functions are considered independently of the
driving function for this purpose.
► Only activate the power seat functions if no fault or
error is present.
6.8.2 Power seat height adjustment
WARNING
Improper use of the seat height adjustment feature
Risk of falling or tipping over due to operator error
►
Use the seat height adjustment feature only with the
backrest in the upright position.
► Drive in street traffic only with the seat height adjust­
ment lowered.
► When driving with the seat height adjustment feature
raised, fasten the belts (lap belt, four-point belt) and do
not lean out beyond the seat surface.
Usage