Otto Bock B400b400, Инструкция по эксплуатации

Страница: 15 / 76

Ottobock | 15 B400
Fig. 2 Adjusting the back angle
5.3.3 Adjusting the side panels
INFORMATION
To remove and install the side panels: see Page 18.
Adjusting the armrest height
1) Loosen the thumb screw on the side panel mounting
(see Fig. 3).
2) Slide the armrests up or down to the desired position.
3) Fasten the thumb screw.
Fig. 3 Thumb screw for adjusting the height
Adjusting the armrest to the forearm length
1) Loosen the two Allen head screws (Allen key, size 3) on
the bottom of the armrest (see Fig. 4, item 1).
2) Push the armrest to the front or back into the desired
position (see Fig. 4, item 2).
3) Tighten the 2 Allen head screws.
Preparation for Use