12 | Ottobock
3R90, 3R92
2 Technical data
Article number
3R90
3R92
Proximal connection
Pyramid adapter
Distal connection
Tube clamp
Knee flexion angle
135°
Weight
700 g (24.7 oz)
840 g (28.2 oz)
System height
745 g
895 g
Proximal system height to alignment reference point
8 mm (0.31 in)
Distal system height to alignment reference point
89 mm (3.5 in)
146 mm (5.75 in)
Max. user weight
125 kg (275 lbs)
Mobility Grade
1, 2
2, 3
3 Alignment instructions
The advantages of the 3R90 / 3R92 can only be made optimal use of in case of a correct alignment.
The optimal residual limb position must be anticipated when positioning the socket connector.
Plumb lines in the frontal and sagittal planes drawn from the proximal center of the socket and
marked during plaster cast taking and trial fitting of the test socket will facilitate correct position-
ing of the lamination anchor / socket adapter.
To align the prosthesis please proceed in two steps:
First make the bench alignment using an alignment tool such as 743L200 L.A.S.A.R. Assembly.
For subsequent optimization of the alignment, please use
743L100 L.A.S.A.R. Posture.
3.1 Bench alignment with alignment tool
(Fig. 7)
1 Position the middle of the foot approx. 30 mm anterior
to the alignment reference line. This
applies to all feet recommended for use with 3R90 / 3R92, independent of the values in
the instruction manuals of these feet!
2 Add 5 mm to the required heel height. Set correct outward rotation of the foot.
3 Clamp knee joint using Assembly parts. Place the knee center 10 mm posterior to the align-
ment reference line. Pay attention to the knee ground distance and outward rotation of the
knee (approx. 5°). The ring disc – divided into 5 mm sections – makes it easier to read (Fig. 1).
4 Connect knee and foot. Either use the adjustable 2R45=34 Tube Adapter or shorten tube
adapter to the correct length.
5 Mark the center of the socket proximal and distal on the lateral side. Connect both marks with
a line.
6 Now position the socket such that the upper mark passes through the alignment reference
line. Socket flexion normally will be somewhere between 3° and 5°; however, the individual
situation (e.g. hip joint contractures) must be taken into account and, if necessary, more flexion
should be provided. Pay attention to the ischial tuberosity to ground distance!
Attention!
If the residual limb flexion is not taken into account, the joint will be positioned too
far anterior. This will lead to malfunction and premature wear.
Содержание 3R90
