Otodynamics Otoport Lite Скачать руководство пользователя страница 72

Страница: 72 / 208

CHAPTER SEVEN

OAE test procedure

7.4

Quick Save option

The options available from the test result screen depend on the

Quick

Save

option (see chapter

Configuration

)

7.4.1

Quick Save On

Quick Save

On,

select

Left

to save the test to the left ear, or

Right

save to the right ear.

The test will be saved to the current patient or will be given an automatic

ID and name. This name and ID may be edited by selecting

Last

from the

main menu screen (see section

7.8

Automatic print

is selected (see chapter

Configuration

), the print

routine will be activated at this stage. After printing or immediately after

saving, the unit will return to the

Main Menu

Select

Cancel

to proceed without saving the test. The user will be

prompted to confirm

Cancel without save

Содержание Otoport Lite

















































































































































































































Результаты поиска

Содержание Otoport Lite

Отзывы:

Otodynamics Otoport Lite, Руководство пользователя, Страница: 72 / 208

Результаты поиска

Содержание Otoport Lite

Отзывы: