Otodynamics Otoport Lite Скачать руководство пользователя страница 116

Страница: 116 / 208

CHAPTER ELEVEN

Configuration

116

Configuration

11.5

System

The

System

screen allows users to view information on

Memory Status

Controls

Battery

power,

System Information

or to change the

Setup

11.5.1

Memory status

The Otoport has the capacity to store up to 500 test records. The memory

status screen displays the number of records currently stored and the

percentage memory still available.

Selecting

Erase

deletes all test records from the Otoport after requesting

confirmation from the user. A screen confirming the

Erase

is then

displayed and the user is returned to the main menu.

If there is less than 10% free memory then the

Memory Status

screen will

be displayed at start up.

If there is 0% free memory then the

Memory Status

screen will be

displayed automatically and no further tests may be performed until tests

have been erased.

The

Memory Status

screen will be displayed immediately after the 450th

result has been saved warning the user that there is limited storage

capacity left.

Содержание Otoport Lite

















































































































































































































Результаты поиска

Содержание Otoport Lite

Отзывы:

Otodynamics Otoport Lite, Руководство пользователя, Страница: 116 / 208

Результаты поиска

Содержание Otoport Lite

Отзывы: