Otodynamics Otoport Lite Скачать руководство пользователя страница 37

Страница: 37 / 208

Otoport OAE+ABR

User Manual for Otoport Lite model

Getting started

3.5

Initial charge

Before using the equipment for the first time, fully charge the unit. See

chapter

Power

for details.

3.6

Using the Otoport keys and keypad

3.6.1

Control keys

The keys directly below the screen marked with a square, a diamond or a

circle enable you to execute the functions offered on the screens. Their

functions vary from screen to screen, but generally the right (circle) key

provides affirmative options and the left (square) key provides negative

options.

3.6.2

Arrow (navigation) keys

The arrow (navigation) keys provide

Left

Right

and

Down

control and

allow the user to move to options available on the screen. The selected

option becomes highlighted.

The left and right arrow keys scroll through the main menu options.

Содержание Otoport Lite

















































































































































































































Результаты поиска

Содержание Otoport Lite

Отзывы:

Otodynamics Otoport Lite, Руководство пользователя, Страница: 37 / 208

Результаты поиска

Содержание Otoport Lite

Отзывы: