6
Chapter 2 - Installation
Safety Statements
Use only the power supply provided with this product or the manufacturer's
authorized replacement power supply.
Connect the power cord to a properly grounded electrical outlet that is near
the product and easily accessible.
Refer service or repairs, other than those described in the user
documentation, to a professional service person.
DANGER: Do not set up this product or make electrical connections during
a lightning storm.
Installing the Hardware
Power
Power is supplied to the WiJET via a 1.7 amps 5volt DC power adaptor.
WARNING: Do not exceed more than 12A@120VAC/10A@240VAC total
current connected to the WiJET!
VGA Connection
This is a standard 15 pin female VGA connector where you will connect the WiJET to
either a monitor or a projector via a straight-thru monitor cable (either purchased
separately or with the one that comes with the projector or monitor).
Status LED’s
There are two status LED’s on the WiJET. From the front of the unit, the LED on the left
is the power indicator while the LED on the right is the link status and video out
indicator. During boot-up, the link status LED will initially remain unlit. When the link
LED blinks red, it means the WiJET is ready for connection to a PC. Upon connection
from a computer, the LED will turn solid green. Upon disconnection, the LED will revert
back to blinking red again.
Hardware Reset Button
The hardware reset button is located at the back of the WiJET. It requires a bent paper
clip to access the hardware reset switch.
The hardware reset button has two functions. The first function is to reboot the WiJET,
the second function is to set the WiJET back to its factory default.
