25
Chapter 5 – Troubleshooting
Connect Status shows up but the WiJET only displays the banner screen
If you see this screen (Figure 24) for an extended period of time, with the connect bar
increasing, then you will most likely not be able to connect to the WiJET.
Figure 24 Unable to Connect to the WiJET symptoms
Eventually, you should see the screen as in Figure 25
Figure 25 Target Not Found
There are several causes for this.
1) The computer’s WiFi adaptor’s SSID is not set up to be the same as the WiJET’s.
2) The computer’s WiFi Adaptor is not set to Ad-Hoc or Peer-to-Peer mode.
3) The WiJET is somehow not receiving the wireless signal, power-cycle the
WiJET.
