7
To reboot the WiJET, A light tap is all that is required.
To reset the WiJET back to the factory settings, follow the steps below:
1. Turn on WiJET or reboot the WiJET
2. When the banner shows up, you now have 10 seconds to do step 3
3. Insert a pin or unbent paper clip into the hardware reboot location.
Caution: Please note that resetting the WiJET to its factory default means losing all
configuration and encryption information you may have set through the web
interface!
You have now reset the WiJET back to its factory default!
Installing the Software
The following details the steps involved in installing the software needed to control the
WiJET.
System Requirements for User Software
To use the WiJET’s utility software, your computer must meet the following
requirements.
WiFi enabled computer (either built-in or add-on NIC).
Windows 98/2000/XP
Installation for the WiJET Presentation Session Manager
Insert the Installation Disc in your computer’s CD-ROM drive. The install program
should then auto-start. If the program does not auto-start, go to “My Computer” and
double click on the Installation Disc icon. Click on setup.exe once you can see the CD’s
contents.
Simply follow the instruction that comes up on each of the windows during the
installation process. When installation finishes, you will be brought back to your
desktop.
Installation for the WiJET Administration Tool
To install the WiJET Administration Tool, you must first install the WiJET PSM. If you
do not install the WiJET PSM, installation of the WiJET Administration tool will fail.
