8
Insert the Installation Disc in your computer’s CD-ROM drive. The install program
should then auto-start. Click “Cancel” and then “exit setup” to stop the installation of the
WiJET PSM utility. Click on “Start”, “Run”, and then type in “x:\” where x is the drive
letter of your CD-ROM.
Click on the “Administration” folder and double click on “setup.exe”. Follow the
instruction that comes up on each of the windows during the installation process. When
you are done, there will be an additional icon in the Start button menu item. For
instructions on how to use the Administration Tool, please see Chapter 4 – Using the
Web Based Utility.
System Requirements for Web-based Utility program
A Web-based Utility program is built into the WiJET. It is used to change the settings of
the WiJET. To use the WiJET’s Web-based Utility software, your computer must meet
the following requirements:
(1) A Web browser must be installed on the computer. The supported Web browsers
include Internet Explorer 5.0 and above, Netscape 6.0 and above, Mozilla 1.0 or above
and Opera 6.05 or above. JavaScript for the browser must be enabled.
(2) WiFi enabled computer (either built-in or add-on NIC).
In order to configure it, you only need to know the factory default settings. An optional
Windows-based WiJET Administration Utility is available if automatic launch of the
Web-based Utility from a computer with Windows OS is desired. See Chapter 3 for
detailed information of configuring the WiJET.
