OTARI RADAR II, Руководство по эксплуатации

Страница: 69 / 261

3.8.1 Additive Solo Mode Operation
In Additive Solo mode, each time a track solo button is pressed, the track is “added”
to any others being soloed, as follows:
1. Press the TRACK SOLO button. The button's LED will flash quickly and
the LCD will prompt:
2. Choose one or several tracks from the Track Arming group. When
selected, the track arming LEDs will blink for each soloed track. You may
now perform all transport operations except recording.
Please Note:
During playback, the meters will show levels for only those tracks soloed.
3. To take a soloed track out of Solo mode, simply press its track arm button
again.
Its LED will turn off, and it will no longer appear on the meters.
4. To disable TRACK SOLO, press the Track Solo button again. Its LED will
go out and you can resume normal operation. The tracks that were
previously set in TRACK SOLO are remembered for the next time you
engage this function.
3.8.2 Interlock Solo Mode Operation
In Interlock Solo mode (the system default; selectable from the Preferences menu),
every time a Solo button is pressed, the previous soloed track(s) are taken out of
Solo.
If you want to solo more than one track, simply press and hold the first track solo
button, then select additional tracks to be soloed.
3.8.3 Momentary Solo Mode Operation
Momentary Solo mode (available from the Preferences menu) means that track(s)
are kept in solo for as long as their solo buttons are held.
R E C O R D I N G & T R A N S P O R T O P E R A T I O N 3-13
Edition 1