manualshive.com logo in svg

OTARI RADAR II, Руководство по эксплуатации

Поделиться
Скачать
OTARI RADAR II Скачать руководство пользователя страница 104

4.4.9.1 Audio Format Overview

RADAR II can record projects using either 16-bit or true 24-bit audio format.  

24-bit audio provides the ultimate quality in digital audio - however, 24-bit projects
uses up disk space faster, take longer to back up and restore, and may not be
compatible with earlier hardware/software products.  

16-bit projects offer excellent audio quality, use less disk space, back up and restore
faster, and maintain compatibility with earlier hardware and software that may not
support 24-bit audio. (16-bit RADAR II projects may be backed up onto tape, and
restored onto RADAR I systems.  However, 24-bit projects cannot be transferred to
earlier RADAR systems.)

RADAR II may have both 16-bit and 24-bit projects on the same hard disk(s)
simultaneously - however the projects cannot share audio files.  

Please Note: You must make this selection before starting a new project.  After the

project is started in one format, it cannot be changed to the other.

•

To select/change the default Audio Format, select the DEF AUDIO
FORMAT item from the Preferences menu.

4.4.9.2 Changing RADAR II's Default Audio Format

1.

Press the MENU/PREV button.

2.

Scroll UP/DOWN through the choices until the PREFERENCES menu
item is displayed. 

3.

Press ENTER.

4.

Scroll through the submenus until the Default Audio Format item is
displayed: 

5..

Press ENTER.  

The system will respond with:

DEF AUDIO FORMAT

16-BIT PCM

MAIN/PREFS MENU

DEF AUDIO FORMAT

MAIN MENU:

PREFERENCES MENU

R A D A R   I I   M E N U   O P E R A T I O N

4-19

Edition 1

Содержание RADAR II






































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды