manualshive.com logo in svg

OTARI RADAR II, Руководство по эксплуатации

Поделиться
Скачать
OTARI RADAR II Скачать руководство пользователя страница 165

into position.  If a SYNC point is present in the clipboard material, the car crash
effect will be pre- and post-timed around that impact.  This feature enables you to
get the effect spotted precisely on the first attempt.

•  To mark a SYNC point, press the MARK SYNC button

7.2.3  Selecting Track(s) for Editing

RADAR II supports editing on any number of tracks from 1 through 24; involved
tracks do not have to be adjacent to each other.  In many editing operations,
RADAR II prompts you to select the track(s) to be used in the edit.  Tracks may be
selected using the Track Arm buttons, on the Session Controller.

7.2.4  Auditioning the Clipboard

You may, at any time, audition RADAR II’s clipboard using the LISTEN feature.
Follow this procedure to audition the clipboard.

1.

Press the SHIFT button.

(The LED in the button will light.)

2.

Press the LISTEN/PASTE button;

you will hear playback of the audio on

the Clipboard. 

(If there is no audio on the Clipboard, the LCD will show an

error message.)

3.

Press the LISTEN/PASTE button again 

to STOP playback, and to return

to Ready mode.

R A D A R   I I   E D I T I N G   F E A T U R E S

7-5

Edition 1

Содержание RADAR II






































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды