manualshive.com logo in svg

OTARI RADAR II, Руководство по эксплуатации

Поделиться
Скачать
OTARI RADAR II Скачать руководство пользователя страница 54

2.10.11  Auto Reclaim Feature

The Auto Reclaim feature, available from the Preferences menu, enables the system
to automatically reclaim space whenever possible, without operator intervention.

Please Note:

Auto Reclaim is enabled by default.

If Auto Reclaim is disabled, the system retains entire audio files, even if only a small
clip is being referenced by playlists.  With Auto Reclaim enabled, if you start out
with a 10-minute recording and edit or repunch so that only 5 seconds of the
original recording is referenced, the system only retains the audible five seconds.
The unused 9 minutes and 55 seconds of inaccessible recording space is freed up for
further use.

Audio file storage is not trimmed or reclaimed unless the audio is no longer
accessible by the current project, the UNDO memory, or the editing clipboard
memory.  RADAR II automatically tracks which audio files are shared between
multiple projects and does NOT automatically trim or delete any shared audio files.

Please Note:

The manual Reclaim Space menu item is still required to trim or reclaim any
audio space that was shared by multiple projects.

Edition 1

2-20

S E C T I O N   2

Содержание RADAR II






































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды