OTARI RADAR II, Руководство по эксплуатации

Страница: 141 / 261

3. Select the desired video reference sync rate, then press ENTER. The
system will respond with a Positional Source selection:
4. Select the desired positional source, then press ENTER. Remember that
Video Reference provides timing information only (i.e. When!), but the
positional source provides the place (i.e. Where!)
If you selected INTERNAL, the system returns to READY mode. If you select
SMPTE, you must now specify an expected frame rate for the time code.
In these cases the system responds with:
5. Use the jog wheel or the cursor keys to select the desired Frame Rate,
then press ENTER.
If you select Internal for positional source, the system will use its internal clock. If
you select SMPTE, RADAR II uses the incoming time code - if you select MIDI,
MTC from the MIDI port is used. In any of these cases, the actual timing is
derived from the incoming video sync.
Edition 1
5-12 S E C T I O N 5