Ossila Spin Coater, Руководство пользователя

Страница: 7 / 22

8
3. Safety
3.1 Warning
• Devices with applied bias or current should NOT be left unattended, as a power failure may
result in board damage or device damage (and potentially hazardous situations).
• Only use the unit with the supplied 24 VDC power adapter.
• Opening the lid will cause the rotating chuck to stop. However, due to inertia, it can take a few
seconds for the chuck to come to a complete stop.
• Ensure the substrate is placed in an adequately-sized chuck recess, as it holds it in place and
stops it flying out.
• The unit should be operated under a working exhaust hood when used with flammable or
toxic substances.
3.2 Use of Equipment
This Spin Coater is designed to be used as instructed, and in the following environmental conditions:
•
Indoors in a laboratory environment (pollution degree 2)
• Altitudes up to 2000 m
• Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The Spin Coater is supplied with a power adapter and a power cord for the country of purchase (in
accordance with European Commission regulations and British Standards). Use of any other electrical
power cables or adaptors is not recommended.
3.3 Hazard Icons
Please note the following symbols that can be found at points throughout the rest of the manual.
Table 1.1 . Hazard warning labels used in this manual.
Symbol Associated Hazard
General warning or caution, which accompanying text will explain
Electrical shock
Explosion
Inhalation