Ossila Spin Coater, Руководство пользователя

Страница: 20 / 22

21
10. Troubleshooting
The Spin Coater should be kept in dry conditions; away from direct sources of heat or sunlight, and in such
a manner as to preserve the working life of the instrument.
9.3 Storage Conditions
Problem Possible cause Action
Spin Coater will not
power up
The power supply may not be
connected properly, or the
switch is in the OFF position
Check the connection and make
sure the power is turned ON
Cycle will not start No recipe programmed
Lid open/close not detected, or
lid still open
Select/program a recipe
Open and close the lid properly
Cycle starts, but
immediately stops
Recipe problem Review, edit and re-enter recipe
as needed
Display time or RPM
appears incorrect
Issue with the program Turn OFF the Spin Coater for 5
seconds, and then restart
Coating issues a. If the chuck is removed (for
cleaning etc), it may not have
been re-inserted properly
causing an imbalance
b. The Spin Coater is not level
c. If the above does not solve
the issue
a. Ensure the chuck is pushed in
thoroughly so that the two
metallic headers are inserted all
the way and flush with the top
of the chuck
b. Place the Spin Coater on a flat and
sturdy surface and use the in-built
spirit level
c. Contact Ossila
Table 10.1. Troubleshooting guidelines for the Ossila Spin Coater